Learn

Lean Course Details

LCEP_Unit 5

Lean Supply Chain and Assembly

Lean Construction challenges all project stakeholders to develop and apply better ways to manage the overall construction process. Unit 5: Lean Supply Chain and Assembly is a full-day course that introduces the lean strategies and tools used to deliver materials, equipment and prefabricated assemblies to the jobsite in a manner that facilitates flow. The four-session course challenges class participants to map the supply chain - looking to minimize waste and maximize value - in a collaborative fashion with all project team members, including suppliers and vendors.

Sponsor: Arizona Builders Alliance
Location: 2620 S 55th Street
City: Tempe
State: AZ
Registration: https://www.azbuilders.org/events/lean-construction-unit-5-lean-supply-chain-assembly-8/
Instructor: Anthony Jeffers & Brad Nelson
Instructor Bio:
Contact: Erica Lange
Contact Email: elange@azbuilders.org

LCEP_Unit 6

Lean Design and Pre-construction

Sponsor: Arizona Builders Alliance
Location: 2620 S 55th Street
City: Tempe
State: AZ
Registration: https://www.azbuilders.org/events/lean-unit-6-lean-design-and-pre-construction-9/
Instructor: Stephen Nichols, W.E. O\
Instructor Bio:
Contact: Erica Lange
Contact Email: elange@azbuilders.org

LCEP_Unit 7

Problem-solving Principles and Tools

Sponsor: Arizona Builders Alliance
Location: 2620 S 55th Street
City: Tempe
State: AZ
Registration: https://www.azbuilders.org/events/aba-lean-unit-7-class-problem-solving-principles-tools-9/
Instructor: Dan Menghini & Melissa Moreno
Instructor Bio:
Contact: Erica Lange
Contact Email: elange@azbuilders.org

LCEP_Unit 6

Lean Design and Pre-construction

Sponsor: AGC New Mexico
Location: 1615 University Blvd NE
City: Albuquerque
State: NM
Registration: https://www.memberleap.com/members/evr/reg_event.php?orgcode=GCNM&evid=14679565
Instructor:
Instructor Bio:
Contact:
Contact Email:

LCEP_Unit 7

Problem-solving Principles and Tools

Sponsor: AGC New Mexico
Location: 1615 University Blvd NE
City: Albuquerque
State: NM
Registration: https://www.memberleap.com/members/evr/reg_event.php?orgcode=GCNM&evid=14679565
Instructor:
Instructor Bio:
Contact:
Contact Email:

LCEP_Unit 6

Lean Design and Pre-construction

Sponsor: AGC Houston
Location: AGC Houston
City: Houston
State: TX
Flyer: Info
Registration: https://bit.ly/2RMmwzd
Instructor:
Instructor Bio:
Contact: Charlene Anthony
Contact Email: charlene.a@agchouston.org

LCEP_Unit 3

Lean Workstructuring

Lean Construction challenges all project stakeholders to develop and apply better ways to manage the overall construction process. Unit 3: Lean Workstructuring is a half-day course that introduces an essential component of the Last Planner System, Lean Workstructuring.

Within construction, we all strive to plan our projects in a way that produces predictable workflow and continuous improvement. This course provides participants with the tools needed to apply Lean Workstructuring principles within the Last Planner System.

Sponsor: Arizona Builders Alliance
Location: 1661 N. Swan Road, Suite 144
City: Tucson
State: AZ
Registration: https://www.azbuilders.org/events/lean-construction-unit-3-lean-workstructuring-9/
Instructor:
Instructor Bio:
Contact: Debbie Carlson
Contact Email: dcarlson@azbuilders.org

LCEP_Unit 4

The Last Planner® System

Lean Construction challenges all project stakeholders to develop and apply better ways to manage the overall construction process. Unit 4: The Last Planner® System is a half-day course that delves in creating six-week look-ahead schedules and weekly work plans. Within construction, we all strive to plan our projects in a way that produces predictable workflow and continuous improvement. Unit 4 is the second of two units introducing the Last Planner System (LPS). This half-day, facilitator-led course shows how to conduct make-ready and weekly work planning sessions.

Sponsor: Arizona Builders Alliance
Location: 1661 N. Swan Road, Suite 144
City: Tucson
State: AZ
Registration: https://www.azbuilders.org/events/lean-construction-unit-4-the-last-planner-system-9/
Instructor:
Instructor Bio:
Contact: Debbie Carlson
Contact Email: dcarlson@azbuilders.org

LCEP_Unit 5

Lean Supply Chain and Assembly

Lean Construction challenges all project stakeholders to develop and apply better ways to manage the overall construction process. Unit 5: Lean Supply Chain and Assembly is a full-day course that introduces the lean strategies and tools used to deliver materials, equipment and prefabricated assemblies to the jobsite in a manner that facilitates flow. The four-session course challenges class participants to map the supply chain - looking to minimize waste and maximize value - in a collaborative fashion with all project team members, including suppliers and vendors.

Sponsor: Arizona Builders Alliance
Location: 1661 N. Swan Road, Suite 144
City: Tucson
State: AZ
Registration: https://www.azbuilders.org/events/lean-construction-unit-5-lean-supply-chain-assembly-9/
Instructor: Debbie
Instructor Bio:
Contact: Debbie Carlson
Contact Email: dcarlson@azbuilders.org

LCEP_Unit 6

Lean Design and Pre-construction

Sponsor: Arizona Builders Alliance
Location: 1661 N. Swan Road, Suite 144
City: Tucson
State: AZ
Registration: https://www.azbuilders.org/events/lean-construction-unit-6-lean-design-and-pre-construction/
Instructor:
Instructor Bio:
Contact: Debbie Carlson
Contact Email: dcarlson@azbuilders.org

LCEP_Unit 7

Problem-solving Principles and Tools

Sponsor: Arizona Builders Alliance
Location: 1661 N. Swan Road, Suite 144
City: Tucson
State: AZ
Registration: https://www.azbuilders.org/events/lean-construction-unit-7-problem-solving-principles-tools/
Instructor:
Instructor Bio:
Contact: Debbie Carlson
Contact Email: dcarlson@azbuilders.org

LCEP_Unit 1

Variation in Production Systems

Lean Construction challenges all project stakeholders to develop and apply better ways to manage the overall construction process. Unit 1: Variation in Production Systems is a half-day course that introduces one of the foundational concepts of Lean Construction, variation. All work on a construction project is connected and variation in even one part affects the entire project. This course provides the necessary tools for participants to recognize sources of variation on their own projects, examine variation's detrimental effect on operations, and mitigate its effects.

Sponsor: AGC Georgia
Location: 1940 The Exchange, Training Center
City: Atlanta
State: GA
Flyer: Info
Registration:
Instructor: Ed Beck
Instructor Bio:
Contact: Cindy Parham
Contact Email: parham@agcga.org

LCEP_Unit 2

Pull in Production

Lean Construction challenges all project stakeholders to develop and apply better ways to manage the overall construction process. Unit 2: Pull in Production is a half-day courses that introduces the concept of pull as a means to reliable workflow.

Sponsor: AGC Georgia
Location: 1940 The Exchange, Training Center
City: Atlanta
State: GA
Flyer: Info
Registration:
Instructor:
Instructor Bio:
Contact: Cindy Parham
Contact Email: parham@agcga.org

LCEP_Unit 3

Lean Workstructuring

Lean Construction challenges all project stakeholders to develop and apply better ways to manage the overall construction process. Unit 3: Lean Workstructuring is a half-day course that introduces an essential component of the Last Planner System, Lean Workstructuring.

Within construction, we all strive to plan our projects in a way that produces predictable workflow and continuous improvement. This course provides participants with the tools needed to apply Lean Workstructuring principles within the Last Planner System.

Sponsor: AGC Georgia
Location: 1940 The Exchange, Training Center
City: Atlanta
State: GA
Flyer: Info
Registration:
Instructor: Ed Beck
Instructor Bio:
Contact: Cindy Parham
Contact Email: parham@agcga.org

LCEP_Unit 4

The Last Planner® System

Lean Construction challenges all project stakeholders to develop and apply better ways to manage the overall construction process. Unit 4: The Last Planner® System is a half-day course that delves in creating six-week look-ahead schedules and weekly work plans. Within construction, we all strive to plan our projects in a way that produces predictable workflow and continuous improvement. Unit 4 is the second of two units introducing the Last Planner System (LPS). This half-day, facilitator-led course shows how to conduct make-ready and weekly work planning sessions.

Sponsor: AGC Georgia
Location: 1940 The Exchange, Training Center
City: Atlanta
State: GA
Flyer: Info
Registration:
Instructor: Ed Beck
Instructor Bio:
Contact: Cindy Parham
Contact Email: parham@agcga.org

LCEP_Unit 6

Lean Design and Pre-construction

Sponsor: AGC Georgia
Location: AGC Georgia Training Center, 1940 The Exchange
City: Atlanta
State: GA
Flyer: Info
Registration:
Instructor: Ed Beck
Instructor Bio:
Contact: Cindy Parham
Contact Email: parham@agcga.org

LCEP_Unit 7

Problem-solving Principles and Tools

Sponsor: AGC Georgia
Location: 1940 The Exchange, Training Center
City: Atlanta
State: GA
Flyer: Info
Registration:
Instructor: Ed Beck
Instructor Bio:
Contact: Cindy Parham
Contact Email: parham@agcga.org

LCEP_Unit 4

The Last Planner® System

Lean Construction challenges all project stakeholders to develop and apply better ways to manage the overall construction process. Unit 4: The Last Planner® System is a half-day course that delves in creating six-week look-ahead schedules and weekly work plans. Within construction, we all strive to plan our projects in a way that produces predictable workflow and continuous improvement. Unit 4 is the second of two units introducing the Last Planner System (LPS). This half-day, facilitator-led course shows how to conduct make-ready and weekly work planning sessions.

Sponsor: San Antonio Chapter of Assoc General Contractors
Location: 10806 Gulfdale
City: San Antonio
State: TX
Flyer: Info
Registration: https://www.sanantonioagc.org/event/lean-unit-4-the-last-planner-system-5/?instance_id=1164
Instructor:
Instructor Bio:
Contact: Shelley Seavers
Contact Email: seavers@sanantonioagc.org

LCEP_Unit 5

Lean Supply Chain and Assembly

Lean Construction challenges all project stakeholders to develop and apply better ways to manage the overall construction process. Unit 5: Lean Supply Chain and Assembly is a full-day course that introduces the lean strategies and tools used to deliver materials, equipment and prefabricated assemblies to the jobsite in a manner that facilitates flow. The four-session course challenges class participants to map the supply chain - looking to minimize waste and maximize value - in a collaborative fashion with all project team members, including suppliers and vendors.

Sponsor: San Antonio Chapter of Assoc General Contractors
Location: 10806 Gulfdale
City: San Antonio
State: TX
Flyer: Info
Registration: https://www.sanantonioagc.org/event/lean-unit-5-lean-supply-chain-and-assembly-6/?instance_id=1165
Instructor:
Instructor Bio:
Contact: Shelley Seavers
Contact Email: seavers@sanantonioagc.org

LCEP_Unit 6

Lean Design and Pre-construction

Sponsor: San Antonio Chapter of Assoc General Contractors
Location: 10806 Gulfdale
City: San Antonio
State: TX
Flyer: Info
Registration: https://www.sanantonioagc.org/event/lean-unit-6-lean-design-and-pre-construction-6/?instance_id=1166
Instructor:
Instructor Bio:
Contact: Shelley Seavers
Contact Email: seavers@sanantonioagc.org

LCEP_Unit 7

Problem-solving Principles and Tools

Sponsor: San Antonio Chapter of Assoc General Contractors
Location: 10806 Gulfdale
City: San Antonio
State: TX
Flyer: Info
Registration: https://www.sanantonioagc.org/event/lean-unit-7-problem-solving-principles-and-tools-6/?instance_id=1167
Instructor:
Instructor Bio:
Contact: Shelley Seavers
Contact Email: seavers@sanantonioagc.org

LCEP_Unit 1

Variation in Production Systems

Lean Construction challenges all project stakeholders to develop and apply better ways to manage the overall construction process. Unit 1: Variation in Production Systems is a half-day course that introduces one of the foundational concepts of Lean Construction, variation. All work on a construction project is connected and variation in even one part affects the entire project. This course provides the necessary tools for participants to recognize sources of variation on their own projects, examine variation's detrimental effect on operations, and mitigate its effects.

Sponsor: AGC of Wisconsin
Location: 4814 E. Broadway
City: Madison
State: WI
Registration: https://web.agcwi.org/events/CMLean-Construction-Education-UNIT-1-VARIATION-IN-PRODUCTION-SYSTEMS-andor-UNIT-2-PULL-IN-PRODUCTION-andor-ALL-7-UNITS-208/details
Instructor: John Koga, CDT, CVS, CM-Lean
Instructor Bio: Decades of experience in many capacities helping clients develop, design and build solutions, training and facilitating project teams on more than 100 projects in 15 states and Canada for Commercial, Industrial, Healthcare, Education, Hotel, Stadium, Recreation, and Government markets.
Contact: Jackie Troia
Contact Email: jtroia@agcwi.org

LCEP_Unit 2

Pull in Production

Lean Construction challenges all project stakeholders to develop and apply better ways to manage the overall construction process. Unit 2: Pull in Production is a half-day courses that introduces the concept of pull as a means to reliable workflow.

Sponsor: AGC of Wisconsin
Location: 4814 E. Broadway
City: Madison
State: WI
Registration: https://web.agcwi.org/events/CMLean-Construction-Education-UNIT-1-VARIATION-IN-PRODUCTION-SYSTEMS-andor-UNIT-2-PULL-IN-PRODUCTION-andor-ALL-7-UNITS-208/details
Instructor: John Koga, CDT, CVS, CM-Lean
Instructor Bio: Decades of experience in many capacities helping clients develop, design and build solutions, training and facilitating project teams on more than 100 projects in 15 states and Canada for Commercial, Industrial, Healthcare, Education, Hotel, Stadium, Recreation, and Government markets.
Contact: Jackie Troia
Contact Email: jtroia@agcwi.org

LCEP_Unit 3

Lean Workstructuring

Lean Construction challenges all project stakeholders to develop and apply better ways to manage the overall construction process. Unit 3: Lean Workstructuring is a half-day course that introduces an essential component of the Last Planner System, Lean Workstructuring.

Within construction, we all strive to plan our projects in a way that produces predictable workflow and continuous improvement. This course provides participants with the tools needed to apply Lean Workstructuring principles within the Last Planner System.

Sponsor: AGC of Wisconsin
Location: 4814 E. Broadway
City: Madison
State: WI
Registration: https://web.agcwi.org/events/CMLean-Construction-Education-UNIT-3-Lean-Workstructuring-andor-UNIT-4-The-Last-Planner-System-209/details
Instructor: John Koga, CDT, CVS, CM-Lean
Instructor Bio: Decades of experience in many capacities helping clients develop, design and build solutions, training and facilitating project teams on more than 100 projects in 15 states and Canada for Commercial, Industrial, Healthcare, Education, Hotel, Stadium, Recreation, and Government markets.
Contact: Jackie Troia
Contact Email: jtroia@agcwi.org

LCEP_Unit 4

The Last Planner® System

Lean Construction challenges all project stakeholders to develop and apply better ways to manage the overall construction process. Unit 4: The Last Planner® System is a half-day course that delves in creating six-week look-ahead schedules and weekly work plans. Within construction, we all strive to plan our projects in a way that produces predictable workflow and continuous improvement. Unit 4 is the second of two units introducing the Last Planner System (LPS). This half-day, facilitator-led course shows how to conduct make-ready and weekly work planning sessions.

Sponsor: AGC of Wisconsin
Location: 4814 E. Broadway
City: Madison
State: WI
Registration: https://web.agcwi.org/events/CMLean-Construction-Education-UNIT-3-Lean-Workstructuring-andor-UNIT-4-The-Last-Planner-System-209/details
Instructor: John Koga, CDT, CVS, CM-Lean
Instructor Bio: Decades of experience in many capacities helping clients develop, design and build solutions, training and facilitating project teams on more than 100 projects in 15 states and Canada for Commercial, Industrial, Healthcare, Education, Hotel, Stadium, Recreation, and Government markets.
Contact: Jackie Troia
Contact Email: jtroia@agcwi.org

LCEP_Unit 5

Lean Supply Chain and Assembly

Lean Construction challenges all project stakeholders to develop and apply better ways to manage the overall construction process. Unit 5: Lean Supply Chain and Assembly is a full-day course that introduces the lean strategies and tools used to deliver materials, equipment and prefabricated assemblies to the jobsite in a manner that facilitates flow. The four-session course challenges class participants to map the supply chain - looking to minimize waste and maximize value - in a collaborative fashion with all project team members, including suppliers and vendors.

Sponsor: AGC of Wisconsin
Location: 4814 E. Broadway
City: Madison
State: WI
Registration: https://web.agcwi.org/events/CM-LEAN-Unit-5-Lean-Supply-Chain-and-Assembly-214/details
Instructor: John Koga, CDT, CVS, CM-Lean
Instructor Bio: Decades of experience in many capacities helping clients develop, design and build solutions, training and facilitating project teams on more than 100 projects in 15 states and Canada for Commercial, Industrial, Healthcare, Education, Hotel, Stadium, Recreation, and Government markets.
Contact: Jackie Troia
Contact Email: jtroia@agcwi.org

LCEP_Unit 6

Lean Design and Pre-construction

Sponsor: AGC of Wisconsin
Location: 4814 E. Broadway
City: Madison
State: WI
Registration: https://web.agcwi.org/events/CM-LEAN-Unit-6-Lean-Design-and-Preconstruction-215/details
Instructor: John Koga, CDT, CVS, CM-Lean
Instructor Bio: Decades of experience in many capacities helping clients develop, design and build solutions, training and facilitating project teams on more than 100 projects in 15 states and Canada for Commercial, Industrial, Healthcare, Education, Hotel, Stadium, Recreation, and Government markets.
Contact: Jackie Troia
Contact Email: jtroia@agcwi.org

LCEP_Unit 7

Problem-solving Principles and Tools

Sponsor: AGC of Wisconsin
Location: 4814 E. Broadway
City: Madison
State: WI
Registration: https://web.agcwi.org/events/CM-LEAN-Unit-7-Problemsolving-Principles-and-Tools-216/details
Instructor: John Koga, CDT, CVS, CM-Lean
Instructor Bio: Decades of experience in many capacities helping clients develop, design and build solutions, training and facilitating project teams on more than 100 projects in 15 states and Canada for Commercial, Industrial, Healthcare, Education, Hotel, Stadium, Recreation, and Government markets.
Contact: Jackie Troia
Contact Email: jtroia@agcwi.org

LCEP_Unit 1

Variation in Production Systems

Lean Construction challenges all project stakeholders to develop and apply better ways to manage the overall construction process. Unit 1: Variation in Production Systems is a half-day course that introduces one of the foundational concepts of Lean Construction, variation. All work on a construction project is connected and variation in even one part affects the entire project. This course provides the necessary tools for participants to recognize sources of variation on their own projects, examine variation's detrimental effect on operations, and mitigate its effects.

Sponsor: Inland NW AGC
Location: 4935 E Trent Ave
City: Spokane
State: WA
Registration: http://www.nwagc.org/events/details/lean-construction-education-program-agc-10-28-19-2989
Instructor: Robert Warcup
Instructor Bio: Assistant Professor of Construction Management at Utah Valley University
Contact: Mary Tantriella
Contact Email: mtantriella@nwagc.org

LCEP_Unit 2

Pull in Production

Lean Construction challenges all project stakeholders to develop and apply better ways to manage the overall construction process. Unit 2: Pull in Production is a half-day courses that introduces the concept of pull as a means to reliable workflow.

Sponsor: Inland NW AGC
Location: 4935 E Trent Ave
City: Spokane
State: WA
Registration: http://www.nwagc.org/events/details/lean-construction-education-program-agc-10-28-19-2989
Instructor: Robert Warcup
Instructor Bio: Assistant Professor of Construction Management at Utah Valley University:
Contact: Mary Tantriella
Contact Email: mtantriella@nwagc.org

LCEP_Unit 3

Lean Workstructuring

Lean Construction challenges all project stakeholders to develop and apply better ways to manage the overall construction process. Unit 3: Lean Workstructuring is a half-day course that introduces an essential component of the Last Planner System, Lean Workstructuring.

Within construction, we all strive to plan our projects in a way that produces predictable workflow and continuous improvement. This course provides participants with the tools needed to apply Lean Workstructuring principles within the Last Planner System.

Sponsor: Inland NW AGC
Location: 4935 E Trent Ave
City: Spokane
State: WA
Registration: http://www.nwagc.org/events/details/lean-construction-education-program-agc-10-28-19-2989
Instructor: Robert Warcup
Instructor Bio: Assistant Professor of Construction Management at Utah Valley University:
Contact: Mary Tantriella
Contact Email: mtantriella@nwagc.org

LCEP_Unit 4

The Last Planner® System

Lean Construction challenges all project stakeholders to develop and apply better ways to manage the overall construction process. Unit 4: The Last Planner® System is a half-day course that delves in creating six-week look-ahead schedules and weekly work plans. Within construction, we all strive to plan our projects in a way that produces predictable workflow and continuous improvement. Unit 4 is the second of two units introducing the Last Planner System (LPS). This half-day, facilitator-led course shows how to conduct make-ready and weekly work planning sessions.

Sponsor: Inland NW AGC
Location: 4935 E Trent Ave
City: Spokane
State: WA
Registration: http://www.nwagc.org/events/details/lean-construction-education-program-agc-10-28-19-2989
Instructor: Robert Warcup
Instructor Bio: Assistant Professor of Construction Management at Utah Valley University:
Contact: Mary Tantriella
Contact Email: mtantriella@nwagc.org

LCEP_Unit 5

Lean Supply Chain and Assembly

Lean Construction challenges all project stakeholders to develop and apply better ways to manage the overall construction process. Unit 5: Lean Supply Chain and Assembly is a full-day course that introduces the lean strategies and tools used to deliver materials, equipment and prefabricated assemblies to the jobsite in a manner that facilitates flow. The four-session course challenges class participants to map the supply chain - looking to minimize waste and maximize value - in a collaborative fashion with all project team members, including suppliers and vendors.

Sponsor: Inland NW AGC
Location: 4935 E Trent Ave
City: Spokane
State: WA
Registration: http://www.nwagc.org/events/details/lean-construction-education-program-agc-10-28-19-2989
Instructor: Robert Warcup
Instructor Bio: Assistant Professor of Construction Management at Utah Valley University:
Contact: Mary Tantriella
Contact Email: mtantriella@nwagc.org

LCEP_Unit 6

Lean Design and Pre-construction

Sponsor: Inland NW AGC
Location: 4935 E Trent Ave
City: Spokane
State: WA
Registration: http://www.nwagc.org/events/details/lean-construction-education-program-agc-10-28-19-2989
Instructor: Robert Warcup
Instructor Bio: Assistant Professor of Construction Management at Utah Valley University:
Contact: Mary Tantriella
Contact Email: mtantriella@nwagc.org

LCEP_Unit 7

Problem-solving Principles and Tools

Sponsor: Inland NW AGC
Location: 4935 E Trent Ave
City: Spokane
State: WA
Registration: http://www.nwagc.org/events/details/lean-construction-education-program-agc-10-28-19-2989
Instructor: Robert Warcup
Instructor Bio: Assistant Professor of Construction Management at Utah Valley University:
Contact: Mary Tantriella
Contact Email: mtantriella@nwagc.org

LCEP_Unit 1

Variation in Production Systems

Lean Construction challenges all project stakeholders to develop and apply better ways to manage the overall construction process. Unit 1: Variation in Production Systems is a half-day course that introduces one of the foundational concepts of Lean Construction, variation. All work on a construction project is connected and variation in even one part affects the entire project. This course provides the necessary tools for participants to recognize sources of variation on their own projects, examine variation's detrimental effect on operations, and mitigate its effects.

Sponsor: AGC of DC
Location: TBD
City: Arlington
State: VA
Registration: https://business.agcofdc.org/event-calendar/Details/lean-education-september-9-13-116279?sourceTypeId=Website
Instructor:
Instructor Bio:
Contact: Cherie Pleasant
Contact Email: pleasant@agcofdc.org

LCEP_Unit 2

Pull in Production

Lean Construction challenges all project stakeholders to develop and apply better ways to manage the overall construction process. Unit 2: Pull in Production is a half-day courses that introduces the concept of pull as a means to reliable workflow.

Sponsor: AGC of DC
Location: TBD
City: Arlington
State: VA
Registration: https://business.agcofdc.org/event-calendar/Details/lean-education-september-9-13-116279?sourceTypeId=Website
Instructor:
Instructor Bio:
Contact: Cherie Pleasant
Contact Email: pleasant@agcofdc.org

LCEP_Unit 3

Lean Workstructuring

Lean Construction challenges all project stakeholders to develop and apply better ways to manage the overall construction process. Unit 3: Lean Workstructuring is a half-day course that introduces an essential component of the Last Planner System, Lean Workstructuring.

Within construction, we all strive to plan our projects in a way that produces predictable workflow and continuous improvement. This course provides participants with the tools needed to apply Lean Workstructuring principles within the Last Planner System.

Sponsor: Master Builders Association
Location: TBD
City: Arlington
State: VA
Registration: https://business.agcofdc.org/event-calendar/Details/lean-education-september-9-13-116279?sourceTypeId=Website
Instructor:
Instructor Bio:
Contact: Cherie Pleasant
Contact Email: pleasant@agcofdc.org

LCEP_Unit 4

The Last Planner® System

Lean Construction challenges all project stakeholders to develop and apply better ways to manage the overall construction process. Unit 4: The Last Planner® System is a half-day course that delves in creating six-week look-ahead schedules and weekly work plans. Within construction, we all strive to plan our projects in a way that produces predictable workflow and continuous improvement. Unit 4 is the second of two units introducing the Last Planner System (LPS). This half-day, facilitator-led course shows how to conduct make-ready and weekly work planning sessions.

Sponsor: AGC of DC
Location: TBD
City: Arlington
State: VA
Registration: https://business.agcofdc.org/event-calendar/Details/lean-education-september-9-13-116279?sourceTypeId=Website
Instructor:
Instructor Bio:
Contact: Cherie Pleasant
Contact Email: pleasant@agcofdc.org

LCEP_Unit 5

Lean Supply Chain and Assembly

Lean Construction challenges all project stakeholders to develop and apply better ways to manage the overall construction process. Unit 5: Lean Supply Chain and Assembly is a full-day course that introduces the lean strategies and tools used to deliver materials, equipment and prefabricated assemblies to the jobsite in a manner that facilitates flow. The four-session course challenges class participants to map the supply chain - looking to minimize waste and maximize value - in a collaborative fashion with all project team members, including suppliers and vendors.

Sponsor: AGC of DC
Location: TBD
City: Arlington
State: VA
Registration: https://business.agcofdc.org/event-calendar/Details/lean-education-september-9-13-116279?sourceTypeId=Website
Instructor:
Instructor Bio:
Contact: Cherie Pleasant
Contact Email: pleasant@agcofdc.org

LCEP_Unit 1

Variation in Production Systems

Lean Construction challenges all project stakeholders to develop and apply better ways to manage the overall construction process. Unit 1: Variation in Production Systems is a half-day course that introduces one of the foundational concepts of Lean Construction, variation. All work on a construction project is connected and variation in even one part affects the entire project. This course provides the necessary tools for participants to recognize sources of variation on their own projects, examine variation's detrimental effect on operations, and mitigate its effects.

Sponsor: AGC of DC
Location: TBD
City: Arlington
State: VA
Registration: https://business.agcofdc.org/event-calendar/Details/lean-education-september-9-13-116279?sourceTypeId=Website
Instructor:
Instructor Bio:
Contact: Cherie Pleasant
Contact Email: pleasant@agcofdc.org

LCEP_Unit 7

Problem-solving Principles and Tools

Sponsor: AGC of DC
Location: TBD
City: Arlington
State: VA
Registration: https://business.agcofdc.org/event-calendar/Details/lean-education-september-9-13-116279?sourceTypeId=Website
Instructor:
Instructor Bio:
Contact: Cherie Pleasant
Contact Email: pleasant@agcofdc.org

LCEP_Unit 6

Lean Design and Pre-construction

Sponsor: AGC of DC
Location: TBD
City: Arlington
State: VA
Registration: https://agcofdc.growthzoneapp.com/ap/Events/Register/DpB61DOp?sourceTypeId=Website
Instructor:
Instructor Bio:
Contact: Cherie Pleasant
Contact Email: pleasant@agcofdc.org

LCEP_Unit 5

Lean Supply Chain and Assembly

Lean Construction challenges all project stakeholders to develop and apply better ways to manage the overall construction process. Unit 5: Lean Supply Chain and Assembly is a full-day course that introduces the lean strategies and tools used to deliver materials, equipment and prefabricated assemblies to the jobsite in a manner that facilitates flow. The four-session course challenges class participants to map the supply chain - looking to minimize waste and maximize value - in a collaborative fashion with all project team members, including suppliers and vendors.

Sponsor: AGC Georgia
Location: 1940 The Exchange, Training Center
City: Atlanta
State: GA
Flyer: Info
Registration:
Instructor:
Instructor Bio:
Contact: Cindy Parham
Contact Email: parham@agcga.org

LCEP_Unit 5

Lean Supply Chain and Assembly

Lean Construction challenges all project stakeholders to develop and apply better ways to manage the overall construction process. Unit 5: Lean Supply Chain and Assembly is a full-day course that introduces the lean strategies and tools used to deliver materials, equipment and prefabricated assemblies to the jobsite in a manner that facilitates flow. The four-session course challenges class participants to map the supply chain - looking to minimize waste and maximize value - in a collaborative fashion with all project team members, including suppliers and vendors.

Sponsor: AGC Georgia
Location: 1940 The Exchange, Training Center
City: Atlanta
State: GA
Flyer: Info
Registration:
Instructor:
Instructor Bio:
Contact: Cindy Parham
Contact Email: parham@agcga.org

LCEP_Unit 5

Lean Supply Chain and Assembly

Lean Construction challenges all project stakeholders to develop and apply better ways to manage the overall construction process. Unit 5: Lean Supply Chain and Assembly is a full-day course that introduces the lean strategies and tools used to deliver materials, equipment and prefabricated assemblies to the jobsite in a manner that facilitates flow. The four-session course challenges class participants to map the supply chain - looking to minimize waste and maximize value - in a collaborative fashion with all project team members, including suppliers and vendors.

Sponsor: AGC Georgia
Location: 1940 The Exchange, Training Center
City: Atlanta
State: GA
Flyer: Info
Registration:
Instructor:
Instructor Bio:
Contact: Cindy Parham
Contact Email: parham@agcga.org

LCEP_Unit 6

Lean Design and Pre-construction

Sponsor: AGC Georgia
Location: 1940 The Exchange, Training Center
City: Atlanta
State: GA
Flyer: Info
Registration:
Instructor:
Instructor Bio:
Contact: Cindy Parham
Contact Email: parham@agcga.org

LCEP_Unit 6

Lean Design and Pre-construction

Sponsor: AGC Georgia
Location: 1940 The Exchange, Training Center
City: Atlanta
State: GA
Flyer: Info
Registration:
Instructor:
Instructor Bio:
Contact: Cindy Parham
Contact Email: parham@agcga.org

LCEP_Unit 6

Lean Design and Pre-construction

Sponsor: AGC Georgia
Location: 1940 The Exchange, Training Center
City: Atlanta
State: GA
Flyer: Info
Registration:
Instructor:
Instructor Bio:
Contact: Cindy Parham
Contact Email: parham@agcga.org
Go to top